Perl in a Nutshell

Perl in a NutshellSearch this book
Previous: 18.1 WidgetsChapter 18
Perl/Tk
Next: 18.3 Common Widget Configuration Options
 

18.2 Geometry Managers

Creating widgets and determining how to display them are done with separate commands. You can create a widget with one of the widget creation methods (such as Button, Canvas, etc.), but you display them using a geometry manager. The three geometry managers are pack, grid, and place. pack is by far the most commonly used.

You can either pack a widget as you create it, or you can create the widget object and pack it separately. For example, the previous "Hello World!" example might have read:

#!/usr/bin/perl -w
use Tk;
my $mw = MainWindow->new;
$button = $mw->Button(-text => "Hello World!", -command =>sub{exit});
$button->pack;
MainLoop;

18.2.1 The pack Geometry Manager

With the pack geometry manager, widgets cannot overlap or cover each other, either partially or completely. Once a widget is packed into a window, the next widget is packed in the remaining space around it. pack sets up an "allocation rectangle" for each widget, determined by the dimensions of the parent window and the positioning of the widgets already packed into it. This means that the order in which you pack your widgets is very important.

By default, pack places widgets at the top center of the allocation rectangle. However, you can use options to pack to control where a widget is placed and how much padding is placed around it. Options for pack are:

-side => side

Puts the widget against the specified side of the window. Values for side are 'left', 'right', 'top', and 'bottom'. The default is 'top'.

-fill => direction

Causes the widget to fill the allocation rectangle in the specified direction. Values for direction are 'none', 'x', 'y', and 'both'. The default is 'none'.

-expand => boolean

Causes the allocation rectangle to fill the remaining space available in the window. Values are 'yes', 'no', 1, and 0. The default is 0 ('no').

-anchor => position

Anchors the widget inside the allocation rectangle. Values for position are 'n', 'ne', 'e', 'se', 's', 'sw', 'w', 'nw', and 'center'. The default is 'center'.

-after => $widget

Puts the widget after another widget in packing order.

-before => $widget

Puts the widget before another widget in packing order.

-in => $window

Packs the widget inside another window rather than inside its parent.

-ipadx => amount

Increases the size of the widget horizontally by amount * 2. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-ipady => amount

Increases the size of the widget vertically by amount * 2. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-padx => amount

Places padding on the left and right of the widget. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-pady amount

Places padding on the top and bottom of the widget. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

18.2.1.1 Pack methods

The following methods are associated with pack:

packForget

Causes a widget to be removed from view.

$widget->packForget;
The widget is not destroyed, but is no longer managed by pack. The widget is removed from the packing order, so if it were repacked later, it would appear at the end of the packing order.

packInfo

Returns a list containing all pack information about that widget.

$info = $widget->packInfo;

packPropagate

Suppresses automatic resizing of a Toplevel or Frame widget to accommodate items packed inside of it. The following line turns off automatic resizing:

$widget->packPropagate(0);

packSlaves

Returns an ordered list of all the widgets packed into the parent widget.

$children = $widget->packSlaves;

18.2.2 The grid Geometry Manager

The grid geometry manager divides the window into a grid composed of columns and rows starting at 0,0 in the upper left-hand corner. The resulting grid resembles a spreadsheet, with each widget assigned a cell according to the options to grid. To create a grid, create a frame that is packed inside the parent window and then grid the widgets within the frame.

You can specify explicit rows and columns using options to grid. However, if several widgets are meant to appear in the same row, you can use a single grid command with a list of widgets rather than calling grid for each one. The first widget invokes the grid command, and all other widgets for that column are specified as options to grid. Any subsequent grid commands increment the row by one and start again.

You can use special characters as placeholders:

- (minus sign)

The previous widget should span this column as well. May not follow ^ or x.

x

Leave a blank space.

^

The widget above this one (same column, previous row) should span this row.

Options to grid are:

-column => n

The column in which to place the widget. n is any integer >= 0.

-row => m

The row in which to place the widget. m is any integer >= 0.

-columnspan => n

The number of columns for the widget to span, beginning with the column specified with -column. n is any integer > 0.

-rowspan => m

The number of rows for the widget to span, beginning with the column specified with -row. m is any integer > 0.

-sticky => sides

Stick widget to specified side(s). sides contains characters n, s, e, or w.

-in => $window

Grid widget inside another window instead of its parent.

-ipadx => amount

Increases the size of the widget horizontally by amount * 2. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-ipady => amount

Increases the size of the widget vertically by amount * 2. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-padx => amount

Places padding on the left and right of the widget. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-pady amount

Places padding on the top and bottom of the widget. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

18.2.2.1 Grid methods

The following methods are associated with grid:

gridColumnconfigure

Configures the column specified by the first argument using -weight and -minsize arguments. The -weight argument determines the amount of space to allocate to that column, and the -minsize argument sets the minimum size in pixels. For example:

$widget->gridColumnconfigure(3, -weight => 1);

gridRowconfigure

Configures the row specified by the first argument using -weight and -minsize arguments. The -weight argument determines the amount of space to allocate to that row, and the -minsize argument sets the minimum size in pixels. For example:

$widget->gridRowconfigure(3, -weight => 1);

gridBbox

Returns the bounding box in pixels for the space occupied by the specified grid position (in the order of column, row). For example:

$widget->gridBbox(3,2);

gridForget

Causes the widget(s) to be removed from view. Additional widgets can be specified as arguments.

$widget1->gridForget($widget2, widget3, ...);

gridInfo

Returns information about the widget in list format.

$widget->gridInfo;

gridLocation

Returns the column and row of the widget nearest the specified x,y coordinates (in pixels).

$widget->gridLocation(120, 32);

gridPropagate

Turns off automatic resizing of the widget.

$widget->gridPropagate;

gridSize

Returns the size of the grid, i.e., the number of columns and rows.

$widget->gridSize;

gridSlaves

Returns a list of all widgets contained within a master widget. Optional -row and -column arguments restrict the response to the widget(s) within that row or column.

$children = $widget->gridSlaves(-row => 2);

18.2.3 The Place Geometry Manager

The place geometry manager lets you position a window at explicit x,y coordinates. With place, you can overlap widgets, which isn't allowed with grid or pack. For example, to position a button widget at the upper left corner of a window:

$button->place(-x => 0, -y => 0);
Options to place are:

-anchor => position

The position in the widget that will be placed at the coordinates specified. Values for position are 'n', 'ne', 'e', 'se', 's', 'sw', 'w', 'nw', and 'center'. Default is 'nw'.

-bordermode => location

Determines whether or not the border portion of the widget is included in the coordinate system. Values for location are 'inside', 'outside', and 'ignore'.

-height => amount

Absolute height of the widget. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-in => $window

The child widget will be packed inside the specified window instead of the parent that created it. Any relative coordinates or sizes will still refer to the parent.

-relheight => ratio

The height of the widget relates to the parent widget's height by the specified ratio.

-relwidth => ratio

The width of the widget relates to the parent widget's width by the specified ratio.

-relx => xratio

The widget will be placed relative to its parent by the specified ratio. xratio is a floating point number from 0.0 to 1.0, with 0.0 representing the left side of the parent widget and 1.0 representing the right side.

-rely => yratio

The widget will be placed relative to its parent by the specified ratio. yratio is a floating point number from 0.0 to 1.0, with 0.0 representing the top of the parent widget and 1.0 representing the bottom.

-width => amount

The width of the widget will be the specified amount. amount can be represented as a number followed by c (centimeters), i (inches), m (millimeters), and p (printer points). Pixels are the default units.

-x => xcoord

The widget will be placed at the specified x coordinate.

-y => ycoord

The widget will be placed at the specified y coordinate.

The following methods are associated with place:

placeForget

Causes the widget to be removed from view.

placeInfo

Returns information about the widget.

placeSlaves

Returns a list of widgets managed by the specified parent widget.


Previous: 18.1 WidgetsPerl in a NutshellNext: 18.3 Common Widget Configuration Options
18.1 WidgetsBook Index18.3 Common Widget Configuration Options