Java in a Nutshell

Previous Chapter 11
Internationalization
Next
 

11.2 Unicode

Java uses the Unicode character encoding. Java 1.0 used Unicode version 1.1, while Java 1.1 has adopted the newer Unicode 2.0 standard. Unicode is a 16-bit character encoding established by the Unicode Consortium, which describes the standard as follows (see http://unicode.org):

The Unicode Worldwide Character Standard is a character coding system designed to support the interchange, processing, and display of the written texts of the diverse languages of the modern world. In addition, it supports classical and historical texts of many written languages.

In its current version (2.0), the Unicode standard contains 38,885 distinct coded characters derived from 25 supported scripts. These characters cover the principal written languages of the Americas, Europe, the Middle East, Africa, India, Asia, and Pacifica.

In the canonical form of the Unicode encoding, which is what Java char and String types use, every character occupies two bytes. The Unicode characters \u0020 to \u007E are equivalent to the ASCII and ISO8859-1 (Latin-1) characters 0x20 through 0x7E. The Unicode characters \u00A0 to \u00FF are identical to the ISO8859-1 characters 0xA0 to 0xFF. Thus there is a trivial mapping between Latin-1 and Unicode characters. A number of other portions of the Unicode encoding are based on pre-existing standards, such as ISO8859-5 (Cyrillic) and ISO8859-8 (Hebrew), though the mappings between these standards and Unicode may not be as trivial as the Latin-1 mapping.

Note that Unicode support is quite limited on many platforms. One of the difficulties with the use of Unicode is the poor availability of fonts to display all of the Unicode characters. Figure 11.1 shows the characters that are available on a typical configuration of the U.S. English Windows 95 platform. Note the special box glyph used to indicate undefined characters.

Figure 11.1: Some Unicode characters and their encodings

[Graphic: Figure 11-1]

Unicode is similar to, but not the same as, ISO 10646, the UCS (Universal Character Set) encoding. UCS is a 2- or 4-byte encoding originally intended to contain all national standard character encodings. For example, it was to include the separate Chinese, Japanese, Korean, and Vietnamese encodings for Han ideographic characters. Unicode, in contrast, "unifies" these disparate encodings into a single set of Han characters that work for all four countries. Unicode has been so successful, however, that ISO 10646 has adopted it in place of non-unified encodings. Thus, ISO 10646 is effectively Unicode, with the option of two extra bytes for expansion purposes.

Unicode is a trademark of the Unicode Consortium. Version 2.0 of the standard is defined by the book The Unicode Standard, Version 2.0 (published by Addison-Wesley, ISBN 0-201-48345-9). Further information about the Unicode standard and the Unicode Consortium can be obtained at http://unicode.org/.

Table 11.1 provides an overview of the Unicode 2.0 encoding.

Table 11.1: Outline of the Unicode 2.0 Encoding
Start End Description
0000 1FFF Alphabets
0000 007F Basic Latin
0080 00FF Latin-1 Supplement
0100 017F Latin Extended-A
0180 024F Latin Extended-B
0250 02AF IPA Extensions
02B0 02FF Spacing Modifier Letters
0300 036F Combining Diacritical Marks
0370 03FF Greek
0400 04FF Cyrillic
0530 058F Armenian
0590 05FF Hebrew
0600 06FF Arabic
0900 097F Devanagari
0980 09FF Bengali
0A00 0A7F Gurmukhi
0A80 0AFF Gujarati
0B00 0B7F Oriya
0B80 0BFF Tamil
0C00 0C7F Telugu
0C80 0CFF Kannada
0D00 0D7F Malayalam
0E00 0E7F Thai
0E80 0EFF Lao
0F00 0FBF Tibetan
10A0 10FF Georgian
1100 11FF Hangul Jamo
1E00 1EFF Latin Extended Additional
1F00 1FFF Greek Extended
2000 2FFF Symbols and Punctuation
2000 206F General Punctuation
2070 209F Superscripts and Subscripts
20A0 20CF Currency Symbols
20D0 20FF Combining Marks for Symbols
2100 214F Letterlike Symbols
2150 218F Number Forms
2190 21FF Arrows
2200 22FF Mathematical Operators
2300 23FF Miscellaneous Technical
2400 243F Control Pictures
2440 245F Optical Character Recognition
2460 24FF Enclosed Alphanumerics
2500 257F Box Drawing
2580 259F Block Elements
25A0 25FF Geometric Shapes
2600 26FF Miscellaneous Symbols
2700 27BF Dingbats
3000 33FF CJK Auxiliary
3000 303F CJK Symbols and Punctuation
3040 309F Hiragana
30A0 30FF Katakana
3100 312F Bopomofo
3130 318F Hangul Compatibility Jamo
3190 319F Kanbun
3200 32FF Enclosed CJK Letters and Months
3300 33FF CJK Compatibility
4E00 9FFF

CJK Unified Ideographs Han characters used in China, Japan, Korea, Taiwan, and Vietnam

AC00 D7A3 Hangul Syllables
D800 DFFF Surrogates
D800 DB7F High Surrogates
DB80 DBFF High Private Use Surrogates
DC00 DFFF Low Surrogates
E000 F8FF Private Use
F900 FFFF Miscellaneous
F900 FAFF CJK Compatibility Ideographs
FB00 FB4F Alphabetic Presentation Forms
FB50 FDFF Arabic Presentation Forms-A
FE20 FE2F Combining Half Marks
FE30 FE4F CJK Compatibility Forms
FE50 FE6F Small Form Variants
FE70 FEFE Arabic Presentation Forms-B
FEFF FEFF Specials
FF00 FFEF Halfwidth and Fullwidth Forms
FFF0 FFFF Specials

Unicode and Local Encodings

While Java programs use Unicode text internally, Unicode is not the customary character encoding for most countries or locales. Thus, an important requirement for Java programs is to be able to convert text from the local encoding to Unicode as it is read (from a file or network, for example) and to be able to convert text from Unicode to the local encoding as it is written. In Java 1.0, this requirement is not well supported. In Java 1.1, however, the conversion can be done with the java.io.InputStreamReader and java.io.OutputStreamWriter classes, respectively. These classes load an appropriate ByteToCharConverter or CharToByteConverter class to perform the conversion. Note that these converter classes are part of the sun.io package and are not for public use (although an explicit conversion interface may be defined in a later release of Java).

The UTF-8 Encoding

The canonical two-bytes per character encoding is useful for the manipulation of character data and is the internal representation used throughout Java. However, because a large amount of text used by Java programs is 8-bit text, and because there are so many existing computer systems that support only 8-bit characters, the 16-bit canonical form is usually not the most efficient way to store Unicode text nor the most portable way to transmit it.

Because of this, other encodings called "transformation formats" have been developed. Java provides simple support for the UTF-8 encoding with the DataInputStream.readUTF() and DataOutputStream.writeUTF() methods. UTF-8 is a variable-width or "multi-byte" encoding format; this means that different characters require different numbers of bytes. In UTF-8, the standard ASCII characters occupy only one byte, and remain untouched by the encoding (i.e., a string of ASCII characters is a legal UTF-8 string). As a tradeoff, however, other Unicode characters occupy two or three bytes.

In UTF-8, Unicode characters between \u0000 and \u007F occupy a single byte, which has a value of between 0x00 and 0x7F, and which always has its high-order bit set to 0. Characters between \u0080 and \u07FF occupy two bytes, and characters between \u0800 and \uFFFF occupy three bytes. The first byte of a two-byte character always has high-order bits 110, and the first byte of a three-byte character always has high-order bits 1110. Since single-byte characters always have 0 as their high-order bit, the one-, two-, and three-byte characters can easily be distinguished from each other.

The second and third bytes of two- and three-byte characters always have high-order bits 10, which distinguishes them from one-byte characters, and also distinguishes them from the first byte of a two- or three-byte sequence. This is important because it allows a program to locate the start of a character in a multi-byte sequence.

The remaining bits in each character (i.e., the bits that are not part of one of the required high-order bit sequences) are used to encode the actual Unicode character data. In the single-byte form, there are seven bits available, suitable for encoding characters up to \u007F. In the two-byte form, there are 11 data bits available, which is enough to encode values to \u07FF, and in the three-byte form there are 16 available data bits, which is enough to encode all 16-bit Unicode characters. Table 11.2 summarizes the UTF-8 encoding.

Table 11.2: The UTF-8 Encoding

Start Character

End Character

Required Data Bits

Binary Byte Sequence (x = data bits)

\u0000 \u007F 7 0xxxxxxx
\u0080 \u07FF 11 110xxxxx 10xxxxxx
\u0800 \uFFFF 16 1110xxxx 10xxxxxx 10xxxxxx

The UTF-8 has the following desirable features:

Java actually uses a slightly modified form of UTF-8. The Unicode character \u0000 is encoded using a two-byte sequence, so that an encoded Unicode string never contains null characters.


Previous Home Next
A Word About Locales Book Index Character Encodings

Java in a Nutshell Java Language Reference Java AWT Java Fundamental Classes Exploring Java