Pinouts of Connectors

64NET cable pinout

layout
schematic diagram

add this page to bookmarks

UNKNOWN connector  to the C64 UserPort
C64 Dir PC
GND A --- 25 GND
PB0 C --> 10 /ACK
PB1 D --> 11 BUSY
PB2 E --> 12 PE
PB3 F <-- 5 D3
PB4 H <-- 6 D4
PB5 J <-- 7 D5
PB6 K <-- 8 D6
PB7 L <-- 9 D7

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
25 pin D-SUB MALE connector pin-outs & layouts
25 pin D-SUB MALE connector  to the PC
Pinouts.ru > Pinouts and schemes of parallel ports cables >  Pinout of 64NET cable and layout of connector and 25 pin D-SUB MALE connector

Source(s): 64NET v1.82.58 documentation by Paul Gardner-Stephen from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
44 hits since February 12, 2005