Pinouts of Connectors

Amiga 4 Joysticks Adapter pinout

layout
schematic diagram

add this page to bookmarks

This adapter will make it possible to connect 2 extra joysticks to the Amiga. This requires that the game is aware of this Multi-Joystick Extender in order to use it. The adapter is connected to the parallelport of the Amiga

9 pin D-SUB MALE connector pin-out & layout
9 pin D-SUB MALE connector  to the joysticks
Parport Joy 1 Joy 2
Up 1 2 1 
Down 1 3 2 
Left 1 4 3 
Right 1 5 4 
Up 2 6  1
Down 2 7  2
Left 2 8  3
Right 2 9  4
Fire 2 11   6
Fire 1 13 6 
Ground 2 18   8
Ground 1 19 8 

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
25 pin D-SUB MALE connector pin-outs & layouts
25 pin D-SUB MALE connector  to the cable
Pinouts.ru > Pinouts and schemes of cables and adapters for input devices (such as mouse, keyboard) >  Pinout of Amiga 4 Joysticks Adapter and layout of 9 pin D-SUB MALE connector and 25 pin D-SUB MALE connector

Source(s): Tomi Engdahl"s Joystick page from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
40 hits since February 12, 2005