Pinouts of Connectors

Amstrad Digital Joystick connector pinout

layout
schematic diagram

add this page to bookmarks

Available at the Amstrad CPC6128 and CPC6128 Plus.

9 pin D-SUB MALE connector pin-out & layout
9 pin D-SUB MALE connector  at the computer
Pin Name Dir Description
1 UP <-- Up
2 DOWN <-- Down
3 LEFT <-- Left
4 RIGHT <-- Right
5 n/c - Not connected
6 FIRE2 <-- Fire button 2
7 FIRE1 <-- Fire button 1
8 GND --- Ground
9 GND --- Ground

Digital Joystick 2

Pin Name Dir Description
1 UP <-- Up
2 DOWN <-- Down
3 LEFT <-- Left
4 RIGHT <-- Right
5 n/c - Not connected
6 FIRE2 <-- Fire button 2
7 FIRE1 <-- Fire button 1
8 GND --- Ground
9 n/c - Not connected

Note: Direction is Computer relative Joystick.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB FEMALE connector pin-outs & layouts
9 pin D-SUB FEMALE connector  at the Joystick cable
Pinouts.ru > Pinouts of input devices (keyboards, mices, joysticks) >  Pinout of Amstrad Digital Joystick connector and layout of 9 pin D-SUB MALE connector and 9 pin D-SUB FEMALE connector

Source(s): Amstrad 6128 Plus Home Computer Manual, from Hardware Book, Colin Gaunt, Agnello Guarracino
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
43 hits since February 12, 2005