Pinouts of Connectors

Atari ACSI DMA connector pinout

layout
schematic diagram
add this page to bookmarks

Used to connect Laser printers or Harddrives

19 pin D-SUB connector  at the computer
Pin Name Description
1 D0 Data 0
2 D1 Data 1
3 D2 Data 2
4 D3 Data 3
5 D4 Data 4
6 D5 Data 5
7 D6 Data 6
8 D7 Data 7
9 /CS Chip Select
10 IRQ Interrupt Request
11 GND Ground
12 /RST Reset
13 GND Ground
14 ACK Acknowledge
15 GND Ground
16 A1 ?
17 GND Ground
18 R/W Read/Write
19 REQ Data Request

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
19 pin D-SUB connector  at the device
Pinouts.ru > Pinouts and schemes of parallel ports connectors >  Pinout of Atari ACSI DMA connector and layout of 19 pin D-SUB connector and 19 pin D-SUB connector

Source(s): Hardware Book, Lawrence Wright, Steve & Sally Blair
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
43 hits since February 12, 2005