Pinouts of Connectors

Atari Floppy Port connector pinout

layout
schematic diagram

add this page to bookmarks

14 pin DIN MALE connector pin-out & layout
14 pin DIN MALE connector  at the diskdrive
Pin Name Description
1 RD Read Data
2 SIDE0 Side 0 Select
3 GND Ground
4 INDEX Index
5 SEL0 Drive 0 Select
6 SEL1 Drive 1 Select
7 GND Ground
8 MOTOR Motor On
9 DIR Direction In
10 STEP Step
11 WD Write Data
12 WG Write Gate
13 TRK00 Track 00
14 WP Write Protect

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different diskdrives connectors >  Pinout of Atari Floppy Port connector and layout of 14 pin DIN MALE connector

Source(s): Hardware Book, Lawrence Wright, Steve & Sally Blair
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
45 hits since February 12, 2005