Pinouts of Connectors

Atari Jaguar A/V connector pinout

layout
schematic diagram

add this page to bookmarks

                 TOP (duh)

1A  2A  3A  4A  5A  6A  7A  8A  9A  10A  11A  12A

1B  2B  3B  4B  5B  6B  7B  8B  9B  10B  11B  12B
Pin Name Description
1A AL Audio Left
2A AGND Audio Ground
3A GND Ground
4A GND (chroma) Ground (Chroma)
5A B RGB Blue
6A HSYNC Horizontal sync
7A G RGB Green
8A CHROMA Chroma
9A GND ??? Ground ???
10A +5V ??? +5 VDC ???
11A +5V ??? +5 VDC ???
12A ? ?
     
1B AR Right audio
2B AGND Audio GND
3B GND Ground
4B R RGB Red
5B CSYNC Composite (Vertical) Sync
6B ? ?
7B LGND Luminance Ground
8B LUM Luminance
9B GND Ground
10B CVBSGND Composite Video Ground
11B CVBS Composite Video
12B ? ?

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of video connectors >  Pinout of Atari Jaguar A/V connector and layout of connector

Source(s): Scooping out Jaguar RGB by Duncan Brown in Atari Explorer Online Vol.3 Issue 6, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
46 hits since February 12, 2005