Pinouts of Connectors

GameBoy Cartridge connector pinout

layout
schematic diagram

add this page to bookmarks

Available on the Nintendo GameBoy

UNKNOWN connector  at the GameBoy
Pin Name Description
1 VCC +5 VDC
2 ? ? Connected on Gameboy, but not used on GamePaks.
3 /RESET Reset
4 /WR Write
5 ? ? Used by paging PAL on high capacity GamePaks.
6 A0 Address 0
7 A1 Address 1
8 A2 Address 2
9 A3 Address 3
10 A4 Address 4
11 A5 Address 5
12 A6 Address 6
13 A7 Address 7
14 A8 Address 8
15 A9 Address 9
16 A10 Address 10
17 A11 Address 11
18 A12 Address 12
19 A13 Address 13
20 A14 Address 14
21 /CS Chip Select
22 D0 Data 0
23 D1 Data 1
24 D2 Data 2
25 D3 Data 3
26 D4 Data 4
27 D5 Data 5
28 D6 Data 6
29 D7 Data 7
30 /RD Read
31 ? ? Connected on Gameboy, but not used on Game-Paks.
32 GND Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of videogames connectors >  Pinout of GameBoy Cartridge connector and layout of connector

Source(s): Nintendo GameBoy FAQ, Pinout by Peter Knight Josef Mollers, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
90 hits since February 12, 2005