Pinouts of Connectors

C16/C116/+4 Cassette connector pinout

layout
schematic diagram
add this page to bookmarks

Available on the Commodore C16, C116 and +4 computers.

7 pin MINI-DIN FEMALE (key in the center) connector pin-out & layout
7 pin MINI-DIN FEMALE (key in the center) connector  at the computer
Pin Name Dir Description
1 GND --- Ground
2 +5V --> +5 Volts DC
3 MOTOR --> Cassette Motor
4 READ <-- Cassette Read
5 WRITE --> Cassette Write
6 SENSE --> Cassette Sense
7 GND --- Ground

Note: Direction is Computer relative Cassette.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different diskdrives connectors >  Pinout of C16/C116/+4 Cassette connector and layout of 7 pin MINI-DIN FEMALE (key in the center) connector

Source(s): SAMS Computerfacts CC8 Commodore 16., from Hardware Book, Arwin Vosselman
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
41 hits since February 12, 2005