Pinouts of Connectors

C64 Cassette connector pinout

layout
schematic diagram
add this page to bookmarks

6 pin MALE EDGE connector  at the computer
Pin Name Dir Description
A-1 GND --- Ground
B-2 +5V --> +5 Volts DC
C-3 MOTOR --> Cassette Motor
D-4 READ <-- Cassette Read
E-5 WRITE --> Cassette Write
F-6 SENSE --> Cassette Sense

Note: Direction is Computer relative Cassette.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different diskdrives connectors >  Pinout of C64 Cassette connector and layout of 6 pin MALE EDGE connector

Source(s): Commodore 64 Programmer"s Reference Guide, from Hardware Book, Arwin Vosselman
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
49 hits since February 12, 2005