Pinouts of Connectors

CDTV Expansion Slot connector pinout

layout
schematic diagram

add this page to bookmarks

 2  4  6  8 10 12 14 16 18 20 22 24 26 28 30
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 1  3  5  7  9 11 13 15 17 19 21 24 25 27 29
Pin Name Description
1 GND Ground
2 GND Ground
3 VCC +5 VDC
4 VCC +5 VDC
5 SD1 Data Bus 1
6 SD0 Data Bus 0
7 SD3 Data Bus 3
8 SD2 Data Bus 2
9 SD5 Data Bus 5
10 SD4 Data Bus 4
11 SD7 Data Bus 7
12 SD6 Data Bus 6
13 /SDREQ DMA Request
14 /INTX Interrupt Request
15 /CSS Chip Select
16 /SDACK DMA Acknowledge
17 /IOR I/O Read
18 /IOW I/O Write
19 A8 Address Bus 8
20 7M 7.16 MHz System Clock
21 A6 Address Bus 6
22 A7 Address Bus 7
23 A4 Address Bus 4
24 A5 Address Bus 5
25 A2 Address Bus 2
26 A3 Address Bus 3
27 /IFRST +5 VDC
28 A1 Address Bus 1
29 GND Ground
30 GND Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Different motherboard connectors pinouts >  Pinout of CDTV Expansion Slot connector and layout of connector

Source(s): Darren Ewaniuk"s CDTV Technical Information, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
46 hits since February 12, 2005