Pinouts of Connectors

Cisco Console (9) cable pinout

layout
schematic diagram
add this page to bookmarks

Use this cable to configure a Cisco router thru the Console port at the router.

9 pin D-SUB FEMALE connector pin-out & layout
9 pin D-SUB FEMALE connector  to the computer
DB-9 RJ-45 Dir
Receive Data 2 3 <--
Transmit Data 3 6 -->
Data Terminal Ready 4 7 -->
Ground (use as shield) 5 ---
Data Set Ready 6 2 <--
Request to Send 7 8 -->
Clear to Send 8 1 <--

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
8 pin RJ45 FEMALE connector pin-outs & layouts
8 pin RJ45 FEMALE connector  to the Cisco router
Pinouts.ru > Pinouts and schemes of serial ports cables >  Pinout of Cisco Console (9) cable and layout of 9 pin D-SUB FEMALE connector and 8 pin RJ45 FEMALE connector

Source(s): Hardware Book, Damien Miller
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
112 hits since February 11, 2005