Pinouts of Connectors

Conrad Electronics MM3610D (25) cable pinout

layout
schematic diagram
add this page to bookmarks

Use this cable to connect a Conrad Electronics Multimeter 3610D to a PC serial port.

25 pin D-SUB FEMALE connector pin-out & layout
25 pin D-SUB FEMALE connector  to the PC
  PC Conrad Dir
Request To Send 4 1 -->
Receive Data 3 2 <--
Transmit Data 2 3 -->
Data Terminal Ready 20 4 -->
Ground 7 5 ---

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
5 pin conrad special connector  to the multimeter
Pinouts.ru > Pinouts and schemes of devices cables and adapters >  Pinout of Conrad Electronics MM3610D (25) cable and layout of 25 pin D-SUB FEMALE connector and 5 pin conrad special connector

Source(s): Hardware Book, Anselm Belz
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
41 hits since February 12, 2005