Pinouts of Connectors

EGA connector pinout

layout
schematic diagram

add this page to bookmarks

EGA=Enhanced Graphics Adapter. Interface bus uses a 9-pin D-sub connector. This EGA standard [1984] offered improved resolutions and more colors than CGA. EGA allowed graphical output up to 16 colors (chosen from a palette of 64) at screen resolutions of 640x350, or 80x25 text with 16 colors, all at a refresh rate of 60 Hz. The monitors have a digital interface.

9 pin D-SUB FEMALE connector pin-out & layout
9 pin D-SUB FEMALE connector  at the videocard
Pin Name Description
1 GND Ground
2 SR Secondary Red
3 PR Primary Red
4 PG Primary Green
5 PB Primary Blue
6 SG/I Secondary Green / Intensity
7 SB Secondary Blue
8 H Horizontal Sync
9 V Vertical Sync

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB MALE connector pin-outs & layouts
9 pin D-SUB MALE connector  at the monitor cable
Pinouts.ru > Pinouts of video connectors >  Pinout of EGA connector and layout of 9 pin D-SUB FEMALE connector and 9 pin D-SUB MALE connector

Source(s): Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
106 hits since February 12, 2005