ESDI cable |
pinout (распиновка) |
The ESDI interface requires two cables, one for control and one for data. The control cable is shared between the two drives.
34 pin IDC FEMALE connector to the controller | Each drive has each own data cable. By twisting some wires on the control cable it won"t be necessary to set the ID for each drive, since the twist will do the job. Wires 25 to 29 should be twisted between drive 1 & drive 2. Controller Drive 2 Twist Drive 1 +--+ +--+ +--+ |::|===================| |============| | <-Pin 1 |::|===================| |============| | |::|===================| |============| | |::|===================| |============| | |::|===================| |=====\/=====| | |::|===================| |=====/\=====| | |::|===================| |============| | +--+ +--+ +--+
Data cable
(To the Controller)
20 PIN IDC FEMALE to the Controller.
| 34 pin IDC FEMALE connector to the diskdrive 1 or 2 | |||||||||||||||||||||||||||||||||||||||
Pinouts.ru > Кабели для дисководов > Распиновка ESDI cable использующего разъем 34 pin IDC FEMALE и разъем 34 pin IDC FEMALE | Статус документа: | |
отметить как правильный |
0 отзыв(ов) | |
Щелкните по одной из ссылок для изменения статуса документа. |