Pinouts of Connectors

Atari Enhanced Joystick connector pinout

layout
schematic diagram

add this page to bookmarks

Can be found at Atari Falcon, Jaguar & STe.

15 pin HIGHDENSITY D-SUB FEMALE connector pin-out & layout
15 pin HIGHDENSITY D-SUB FEMALE connector  at the computer
Pin Name Description
1 UP0 Up 0
2 DOWN0 Down 0
3 LEFT0 Left 0
4 RIGHT0 Right 0
5 PAD0Y Paddle 0 Y
6 FIRE0/LIGHT GUN Fire 0/Lightgun
7 VCC +5 VDC
8 n/c Not connected
9 GND Ground
10 FIRE2 Fire 2
11 UP2 Up 2
12 DOWN2 Down 2
13 LEFT2 Left 2
14 RIGHT2 Right 2
15 PAD0X Paddle 0 X

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
15 pin HIGHDENSITY D-SUB MALE connector pin-outs & layouts
15 pin HIGHDENSITY D-SUB MALE connector  at the joystick cable
Pinouts.ru > Pinouts of input devices (keyboards, mices, joysticks) >  Pinout of Atari Enhanced Joystick connector and layout of 15 pin HIGHDENSITY D-SUB FEMALE connector and 15 pin HIGHDENSITY D-SUB MALE connector

Source(s): Do-It-Yourself Atari Jaguar Controller by Andrew Hague, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
38 hits since February 12, 2005