Ethernet 10/100Base-T connector pinout |
layout |
Same connector and pinout for both 10Base-T and 100Base-TX.
8 pin RJ45 FEMALE connector at the network interface cards/hubs |
Note: TX & RX are swapped on Hub´s. Also, please note that it is very important that a single pair be used for pins 3 and 6. If one conductor from one pair is used for pin 3 and a conductor from another pair is used for pin 6, performance will degrade.
| 8 pin RJ45 MALE connector at the cables | ||||||||||||||||||||||||||||||||||||||||||||||
Pinouts.ru > Pinouts of local network connectors > Pinout of Ethernet 10/100Base-T connector and layout of 8 pin RJ45 FEMALE connector and 8 pin RJ45 MALE connector Source(s): Hardware Book, Jeffrey R. Broido | unknown | |
mark as correct |
0 report(s) | |
Click one of this links to change document status. |