Pinouts of Connectors

MSX External Diskdrive connector pinout

layout
schematic diagram

add this page to bookmarks

25 pin D-SUB FEMALE connector pin-out & layout
25 pin D-SUB FEMALE connector  at the computer
Pin Name Dir Description
1 +12V --> +12 VDC
2 +5V --> +5 VDC
3 +5V --> +5 VDC
4 /INDEX <-- Sector hole passed sensor.
5 /DSEL1 --> Drive Select 1
6 DIR --> Direction (0=In, 1=Dir)
7 /STEP --> Moves head 1 step in DIR direction.
8 WRITEDATA --> Write Data
9 /WRITEGATE --> Write Gate
10 /TRACK00 <-- Head is over Track 00 (outermost track)
11 /WRITEPROTECT <-- Write protected disk (0=Write protected)
12 READDATA <-- Data read from diskette.
13 /SIDESELECT --> Side Select (0=Side 1, 1=Side 0)
14 +12V --> +12 VDC
15 +12V --> +12 VDC
16 +5V --> +5 VDC
17 /DSEL1 --> Select Drive 0
18 /MOTOR --> Motor On
19 READY <-- Ready
20 GND --- Ground
21 GND --- Ground
22 GND --- Ground
23 GND --- Ground
24 GND --- Ground
25 GND --- Ground

Note: Direction is Computer relative Diskdrive.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different diskdrives connectors >  Pinout of MSX External Diskdrive connector and layout of 25 pin D-SUB FEMALE connector

Source(s): Mayer"s SV738 X"press I/O map, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
34 hits since February 12, 2005