Pinouts of Connectors

GeekPort connector pinout

layout
schematic diagram

add this page to bookmarks

The GeekPort is a connector available at Be´s BeBox computers. This is a dream for all hobby engineers who like to connect the computer to the coffee machine.

37 pin D-SUB MALE connector pin-out & layout
37 pin D-SUB MALE connector  at the device
Pin Name Description Dir
1 GND Ground  
2 A1 Digital A 1 <->
3 A3 Digital A 3 <->
4 A5 Digital A 5 <->
5 A7 Digital A 7 <->
6 GND Ground  
7 +5V +5 VDC  
8 GND Ground  
9 +12V +12 VDC  
10 GND Ground  
11 -12V -12 VDC  
12 GND Ground  
13 +5V +5 VDC  
14 GND Ground  
15 B0 Digital B 0 <->
16 B2 Digital B 2 <->
17 B4 Digital B 4 <->
18 B6 Digital B 6 <->
19 GND Ground  
20 A0 Digital A 0 <->
21 A2 Digital A 2 <->
22 A4 Digital A 4 <->
23 A6 Digital A 6 <->
24 AIref Analog In Reference <--
25 A2D1 Analog In 1 <--
26 A2D2 Analog In 2 <--
27 A2D3 Analog In 3 <--
28 A2D4 Analog In 4 <--
29 D2A1 Analog Out 1 -->
30 D2A2 Analog Out 2 -->
31 D2A3 Analog Out 3 -->
32 D2A4 Analog Out 4 -->
33 AOref Analog Out Reference <--
34 B1 Digital B 1 <->
35 B3 Digital B 3 <->
36 B5 Digital B 5 <->
37 B7 Digital B 7 <->

Note: Direction is Computer relative Device.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
37 pin D-SUB FEMALE connector pin-outs & layouts
37 pin D-SUB FEMALE connector  at the computer
Pinouts.ru > Different motherboard connectors pinouts >  Pinout of GeekPort connector and layout of 37 pin D-SUB MALE connector and 37 pin D-SUB FEMALE connector

Source(s): BeBox GeekPort DeviceKit at Be´s homepage, BeBox GeekPort DeviceKit, from Hardware Book, BeBox GeekPort DeviceKit at Be"s homepage
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
91 hits since February 12, 2005