Pinouts of Connectors

GEOCable cable pinout

layout
schematic diagram

add this page to bookmarks

24 pin DZM 12 DREH connector pin-out & layout
24 pin DZM 12 DREH connector  to the C64 UserPort
C64 Printer
Ground A 33 Ground
Flag 2 B 11 Busy
PB0 C 2 Data 1
PB1 D 3 Data 2
PB2 E 4 Data 3
PB3 F 5 Data 4
PB4 H 6 Data 5
PB5 J 7 Data 6
PB6 K 8 Data 7
PB7 L 9 Data 8
PA2 M 1 Strobe
Ground N 16 Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
36 pin CENTRONICS MALE connector pin-outs & layouts
36 pin CENTRONICS MALE connector  to the printer
Pinouts.ru > Pinouts and schemes of parallel ports cables >  Pinout of GEOCable cable and layout of 24 pin DZM 12 DREH connector and 36 pin CENTRONICS MALE connector

Source(s): comp.sys.cbm General FAQ v3.1 Part 7
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
37 hits since February 12, 2005