Macintosh Video to VGA Adapter |
pinout (распиновка) |
Use this adapter to connect a standard VGA (or higher) monitor to your Apple Macintosh.
15 pin HIGHDENSITY D-SUB FEMALE connector to the monitor cable | Scheme supports multiple resolutions up to 1024x768 (1152x870), and supports multi-sync monitors like a Viewsonic or Hitachi.
The Mac Quadras, Centris series, and later models should support any display, whether from Apple or from another vendor, that meets one of the following specifications:
Notes: 1) Sense pins 4, 7, and 10 are referred to as MON.ID1, MON.ID2, and MON.ID3 in the Macintosh pinout table or SENSE0, SENSE1, and SENSE2 in pinout tables for the video connectors. A sense pin value of 0 means that pin should be grounded to the C&VSYNC.GND signal (pin 11); a value of 1 means do not connect the pin. 2) Extended sense codes will be examined if the following sense code is detected: 1 1 1 (no sense pins grounded).
NOTE for extended sense codes: Sense pin pair value of 0 means those pins should be tied together (as opposed to grounding 10, 7, or 4 to pin 11); value of 1 means leave open. DON"T wire any of these pins to ground.
| 15 pin D-SUB MALE connector to the mac computer | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pinouts.ru > Кабели для видеокарт, мониторов > Распиновка Macintosh Video to VGA Adapter использующего разъем 15 pin HIGHDENSITY D-SUB FEMALE и разъем 15 pin D-SUB MALE Источник(и): saragossa.net | Статус документа: | |
отметить как правильный |
0 отзыв(ов) | |
Щелкните по одной из ссылок для изменения статуса документа. |