Pinouts of Connectors

Serial (15) connector pinout

layout
schematic diagram
add this page to bookmarks

Seems to be available at a 14.4kbps modem called Speedster.

15 pin FEMALE connector at the modem 
     2   4   6      10  12  14
- [][][][][][][][][][][][][][][] -
   1   3   5   7 8 9  11  13  15
Pin Name RS232 Dir Description
1 GROUND GND --- Ground
2 SUSP# ?
3 COMBDSR# DSR --> Data Set Ready
4 COMBRTS# RTS <-- Request to Send
5 COMBCTS# CTS --> Clear to Send
6 COMBRI# RI --> Ring Indicator
7 n/c ?
8 GROUND GND --- Ground
9 +5VIN <-- +5V DC In
10 COMBDTR# DTR <-- Data Terminal Ready
11 COMBDCD# CD --> Carrier Detect
12 COMBTXD TXD <-- Transmit Data
13 COMBRXD RXD --> Receive Data
14 SPKDATA ?
15 GROUND GND --- Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of serial ports >  Pinout of Serial (15) connector and layout of connector

Source(s): Hardware Book, Joerg Brinkel
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
77 hits since February 12, 2005