Pinouts of Connectors

Motherboard Power connector pinout

layout
schematic diagram
add this page to bookmarks

12 pin 2x MOLEX 15-48-0106 connector pin-out & layout
12 pin 2x MOLEX 15-48-0106 connector  at the computer

P8

Pin Name Color Description
1 PG Orange Power Good, +5 VDC when all voltages has stabilized.
2 +5V Red +5 VDC (or n/c)
3 +12V Yellow +12 VDC
4 -12V Blue -12 VDC
5 GND Black Ground
6 GND Black Ground

P9

Pin Name Color Description
1 GND Black Ground
2 GND Black Ground
3 -5V White or Yellow -5 VDC
4 +5V Red +5 VDC
5 +5V Red +5 VDC
6 +5V Red +5 VDC

Note: Pins part number is 08-50-0276, Product specification is PS-90331.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
6 pin 2x MOLEX 90331-0001 connector pin-outs & layouts
6 pin 2x MOLEX 90331-0001 connector  at the Powersupply cables
Pinouts.ru > Pinouts of power supplyes >  Pinout of Motherboard Power connector and layout of 12 pin 2x MOLEX 15-48-0106 connector and 6 pin 2x MOLEX 90331-0001 connector

Source(s): Hardware Book, Bill Shepherd
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
247 hits since February 11, 2005