Pinouts of Connectors

Printer cable pinout

layout
schematic diagram
add this page to bookmarks

25 pin D-SUB MALE connector pin-out & layout
25 pin D-SUB MALE connector  to the computer
25-DSub 36-Cen
Strobe 1 1
Data Bit 0 2 2
Data Bit 1 3 3
Data Bit 2 4 4
Data Bit 3 5 5
Data Bit 4 6 6
Data Bit 5 7 7
Data Bit 6 8 8
Data Bit 7 9 9
Acknowledge 10 10
Busy 11 11
Paper Out 12 12
Select 13 13
Autofeed 14 14
Error 15 32
Reset 16 31
Select 17 36
Signal Ground 18 33
Signal Ground 19 19,20
Signal Ground 20 21,22
Signal Ground 21 23,24
Signal Ground 22 25,26
Signal Ground 23 27
Signal Ground 24 28,29
Signal Ground 25 30,16
Shield Shield Shield+17

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
36 pin CENTRONICS MALE connector pin-outs & layouts
36 pin CENTRONICS MALE connector  to the printer
Pinouts.ru > Pinouts and schemes of parallel ports cables >  Pinout of Printer cable and layout of 25 pin D-SUB MALE connector and 36 pin CENTRONICS MALE connector

Source(s): Hardware Book, Petr Krc
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
91 hits since February 11, 2005