Pinouts of Connectors

Cable for ROBOTRON 6329.02 pinout

layout
schematic diagram

add this page to bookmarks

Connection of ROBOTRON 6329.02 M to COM2 (V24) port

9 pin D-SUB FEMALE connector pin-out & layout
9 pin D-SUB FEMALE connector  to the computer
Switches must be set by this scheme
5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 -> -> <- <- <- -> -> <- -> <- -> -> <- ->
2 <- <- <- -> <- <- <- <- <- <- <- <- <- ->

Add to autoexec.bat
MODE COM2:4800,N,8,1,P
MODE LPT1:-COM2:
path\prnruh1m.com
Driver prnruh1m.com is here
http://www.uniyar.ac.ru/~dingo/printer/prnruh1m.zip
ROBOTRON 6329.02
Pin name
ROBOTRON 6329.02
Pin
Direction IBM PC/XT/AT COM2 (RS232/423,V24)
Pin 25-pin (9-pin)
IBM PC/XT/AT COM2 (RS232/423,V24)
Pin name
Description
SG /102 A1 7 (5) SG /102
TxD /103 A3 3 (2) RxD /104  
RxD /104 B4 2 (3) TxD /103  
RTS /105 A5 5 (8) CTS /106  
CTS /106 B6 4 (7) RTS /105  
DSR /107 A7 20 (4) DTR /108.2  
DTR /108.2 B8 6 (6) DSR /107  
GND /101 B2 8 (1) GND /101  

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
UNKNOWN connector  to the printer
Pinouts.ru > Pinouts and schemes of parallel ports cables >  Pinout of Cable for ROBOTRON 6329.02 and layout of 9 pin D-SUB FEMALE connector

Source(s): John
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
48 hits since February 12, 2005