Pinouts of Connectors

S-Video connector pinout

layout
schematic diagram
add this page to bookmarks

4 pin MINI-DIN FEMALE connector pin-out & layout
4 pin MINI-DIN FEMALE connector  at the peripheral
S-video sends video signals over a multi-wire cable, dividing the video information into two separate [75 ohm coax or twisted pair cables] signals: one for luminance (Light) "Y" and one for chrominance (Color) "C". Each signal is sent shielded, inclosed in a 4-pin Mini-DIN. S-Video is synonymous with Y/C "Component" video. "S-video is a consumer form of component video used primarily with Hi8 and S-VHS".
Pin Name Description
1 GND Ground (Y)
2 GND Ground (C)
3 Y Intensity (Luminance)
4 C Color (Chrominance)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of some home Audio/Video stuff. >  Pinout of S-Video connector and layout of 4 pin MINI-DIN FEMALE connector

Source(s): Video Demystified at Keith Jack"s pages, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
349 hits since February 11, 2005