Pinouts of Connectors

Serial Printer (25-25) cable pinout

layout
schematic diagram
add this page to bookmarks

Use this cable between two a computer (DTE) and a printer (DTE) devices.

25 pin D-SUB FEMALE connector pin-out & layout
25 pin D-SUB FEMALE connector  to the computer
D-Sub 1 D-Sub 2
Receive Data 2 3 Transmit Data
Transmit Data 3 2 Receive Data
Clear To Send + Data Set Ready 5 + 6 20 Data Terminal Ready
Carrier Detect + Data Terminal Ready 8 + 20    
Ground 7 7 Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
25 pin D-SUB FEMALE connector pin-outs & layouts
25 pin D-SUB FEMALE connector  to the printer
Pinouts.ru > Pinouts and schemes of serial ports cables >  Pinout of Serial Printer (25-25) cable and layout of 25 pin D-SUB FEMALE connector and 25 pin D-SUB FEMALE connector

Source(s): Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
63 hits since February 11, 2005