Pinouts of Connectors

SmartCard ISO connector pinout

layout
schematic diagram
add this page to bookmarks

8 pin SMARTCARD special connector pin-out & layout
8 pin SMARTCARD special connector  at the card
Pin Name Description
1 VCC +5 VDC
2 R/W Read/Write
3 CLOCK Clock
4 RESET Reset
5 GND Ground
6 VPP +21 VDC
7 I/O In/Out
8 FUSE Fuse
Additionally, there is rare used AFNOR version of simcard, which uses slightly different connector with same pinout. To obtain AFNOR connector simply rotate ISO connector (shown) 180 deg clockwise.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different memory connectors >  Pinout of SmartCard ISO connector and layout of 8 pin SMARTCARD special connector

Source(s): Telecard/Smartcard Technical Spec & Info by Stephane Bausson
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
167 hits since February 11, 2005