Pinouts of Connectors

Zorro II connector pinout

layout
schematic diagram

add this page to bookmarks

86 pin EDGE connector at the computer
Pin A500 A1000 A2000 A2000B Name Description
1 X X X X GND Ground
2 X X X X GND Ground
3 X X X X GND Ground
4 X X X X GND Ground
5 X X X X +5V +5 Volts DC
6 X X X X +5V +5 Volts DC
7 X X X X n/c
8 X X X X -5V -5 Volts DC
9 X X n/c
X X 28CLOCK 28MHz Clock
10 X X X X +12V +12 Volts DC
11 X X n/c
X X /COPCFG Configuration Out
12 X X X X CONFIG IN, Grounded
13 X X X X GND Ground
14 X X X X /C3 C3 Clock
15 X X X X CDAC Clock
16 X X X X /C1 C1 Clock
17 X X X X /OVR
18 X X X X RDY Ready
19 X X X X /INT2 Interrupt 2
20 X X /PALOPE
X n/c
X /BOSS
21 X X X X A5 Address 5
22 X X X X /INT6 Interrupt 6
23 X X X X A6 Address 6
24 X X X X A4 Address 4
25 X X X X GND Ground
26 X X X X A3 Address 3
27 X X X X A2 Address 2
28 X X X X A7 Address 7
29 X X X X A1 Address 1
30 X X X X A8 Address 8
31 X X X X FC0 Processor status 0
32 X X X X A9 Address 9
33 X X X X FC1 Processor status 1
34 X X X X A10 Address 10
35 X X X X FC2 Processor status 2
36 X X X X A11 Address 11
37 X X X X GND Ground
38 X X X X A12 Address 12
39 X X X X A13 Address 13
40 X X X X /IPL0
41 X X X X A14 Address 14
42 X X X X /IPL1
43 X X X X A15 Address 15
44 X X X X /IPL2
45 X X X X A16 Address 16
46 X X X X /BEER Bus Error
47 X X X X A17 Address
48 X X X X /VPA
49 X X X X GND Ground
50 X X X X ECLK E Clock
51 X X X X /VMA
52 X X X X A18 Address 18
53 X X X X RST Reset
54 X X X X A19 Address 19
55 X X X X /HLT Halt
56 X X X X A20 Address 20
57 X X X X A22 Address 22
58 X X X X A21 Address 21
59 X X X X A23 Address 23
60 X X /BR
X X /CBR
61 X X X X GND Ground
62 X X X X /BGACK
63 X X X X D15 Data 15
64 X X /BG
X X /CBG
65 X X X X D14 Data 14
66 X X X X /DTACK
67 X X X X D13 Data 13
68 X X X X R/W Read/Write
69 X X X X D12 Data 12
70 X X X X /LDS
71 X X X X D11 Data 11
72 X X X X /UDS
73 X X X X GND Ground
74 X X X X /AS
75 X X X X D0 Data 0
76 X X X X D10 Data 10
77 X X X X D1 Data 1
78 X X X X D9 Data 9
79 X X X X D2 Data 2
80 X X X X D8 Data 8
81 X X X X D3 Data 3
82 X X X X D7 Data 7
83 X X X X D4 Data 4
84 X X X X D6 Data 6
85 X X X X GND Ground
86 X X X X D5 Data 5

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different motherboard slots >  Pinout of Zorro II connector and layout of connector

Source(s): Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
50 hits since February 12, 2005