Pinouts of Connectors

ZX Spectrum ULA connector pinout

layout
schematic diagram

add this page to bookmarks

Can be found at Sinclair ZX Spectrum´s, I think

UNKNOWN connector  at the computer
Pin Name Description
1    
2 /WR Write
3 /RD Read
4 /WE Write Enable
5 A0 Address 0
6 A1 Address 1
7 A2 Address 2
8 A3 Address 3
9 A4 Address 4
10 A5 Address 5
11 A6 Address 6
12 /INT Interrupt
13 +5V +5 VDC (One of the +5V is decoupled through a RC-low-pass.)
14 +5V +5 VDC (One of the +5V is decoupled through a RC-low-pass.)
15 U Color-difference signals.
16 V Color-difference signals.
17 /Y Inverted Video+Sync.
18 D0 Data 0
19 T0 Keyboard Data 0
20 T1 Keyboard Data 1
21 D1 Data 1
22 D2 Data 2
23 T2 Keyboard Data 2
24 T3 Keyboard Data 3
25 D3 Data 3
26 T4 Keyboard Data 4
27 D4 Data 4
28 SOUND Analog-I/O-line for beep, save and load.
29 D5 Data 5
30 D6 Data 6
31 D7 Data 7
32 CLOCK The clock-source to the CPU including the inhibited T-states.
33 /IO-ULA (A0(CPU) OR /IORQ) for the I/O-port FEh
34 /ROM CS ROM ChipSelect
35 /RAS Row Address Strobe
36 A14 Address 14
37 A15 Address 15
38 /MREQ ???
39 Q The 14 MHz crystal. Other side grounded through capacitor.
40    

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Different motherboard connectors pinouts >  Pinout of ZX Spectrum ULA connector and layout of connector

Source(s): ZX Spectrum FAQ, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
66 hits since February 12, 2005