Pinouts of Connectors

Amiga 500/600/1200 Power Supply connector pinout

layout
schematic diagram
add this page to bookmarks

UNKNOWN connector  at the motherboard
Pin Name
1 +5V
2 Shield Ground
3 +12V
4 Signal Ground
5 -12V

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of power supplyes >  Pinout of Amiga 500/600/1200 Power Supply connector and layout of connector

Source(s): Amiga Power Supply pinouts at National Amiga, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
73 hits since February 12, 2005