Pinouts of Connectors

Apple LaserWriter AppleTalk connector pinout

layout
schematic diagram
add this page to bookmarks

9 pin D-SUB MALE connector pin-out & layout
9 pin D-SUB MALE connector
Pin Name Dir Description
1 GND --- Ground
2 n/c   Not connected
3 GND --- Ground
4 TXD+ --> Transmit Data +
5 TXD- --> Transmit Data -
6 n/c   Not connected
7 RXCLK --> TRxC of Zilog 8530
8 RXD+ <-- Receive Data +
9 RXD- <-- Receive Data -

Note: Direction is Printer relative Computer.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB FEMALE connector pin-outs & layouts
9 pin D-SUB FEMALE connector
Pinouts.ru > Pinouts of serial ports >  Pinout of Apple LaserWriter AppleTalk connector and layout of 9 pin D-SUB MALE connector and 9 pin D-SUB FEMALE connector

Source(s): Technote HW19: Pinouts at Apple Technical Notes, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
55 hits since February 11, 2005