Pinouts of Connectors

Apple Video Mirror connector pinout

layout
schematic diagram
add this page to bookmarks

Optional Video Display Mirror Output Feature. Available on Apple Power Macintosh 5400

22 pin unknow connector used
Pin Name Description
1 VID.GND Video ground
2 RED Red signal
3 GREEN Green signal
4 VID.GND Video ground
5 VID.GND Video ground
6 BLUE Blue signal
7 CSYNC C sync
8 VSYNC Vertical sync
9 MLB.SYNC.EN.L Not used (reserved)
10 HSYNC Horizontal sync
11 DAC.ISET.1 Not used(reserved)
12 DAC.ISET.2 Not used (reserved)
13 SND.GND Not used (reserved)
14 SND.RIGHT Not used (reserved)
15 SND.LEFT Not used (reserved)
16 +5V +5 volts
17 GND Ground
18 SDAT Not used (reserved)
19 SCLK Not used (reserved)
20 +12V +12 volts
21 -12V -12 volts
22 Dot Clock Scaled dot clock (scaled to 10 percent)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of video connectors >  Pinout of Apple Video Mirror connector and layout of connector

Source(s): Apple Power Macintosh 5400 Developer Note, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
57 hits since February 12, 2005