Pinouts of Connectors

Atari Falcon030 DSP Port pinout

layout
schematic diagram

add this page to bookmarks

Pin Description
1 General Purpose 0
2 General Purpose 2
3 General Purpose 1
4 SDMA Play Data
5 SDMA Play Clock
6 SDMA Play Sync
7 Not Connect
8 Ground
9 +12V
10 Ground
11 Sync Serial I/F Ctrl 0
12 Sync Serial I/F Ctrl 1
13 Sync Serial I/F Ctrl 2
14 Ground
15 Sync Serial Data In
16 Ground
17 +12V
18 Ground
19 SDMA Record Data
20 SDMA Record Clock
21 SDMA Record Sync
22 DSP Interrupt
23 Sync Serial I/F Data Out
24 Sync Serial I/F Clock
25 Ground
26 External Clock Input

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Different motherboard connectors pinouts >  Pinout of Atari Falcon030 DSP Port and layout of connector

Source(s): Atari Falcon030 DSP pinout at Technick.net
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
44 hits since February 12, 2005