Pinouts of Connectors

ATX / NLX Aux Power Supply connector pinout

layout
schematic diagram

add this page to bookmarks

To be used for motherboards requiring 250W or 300W

6 pin ATX AUX power connector pin-out & layout
6 pin ATX AUX power connector  at the cable
Pin Name   Color Description
1 COM   Black Ground
2 COM   Black Ground
3 COM   Black Ground
4 3.3V   Orange +3.3 VDC
5 3.3V   Orange +3.3 VDC
6 5V   Red +5 VDC

Recommended wiresize 16 AWG

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of power supplyes >  Pinout of ATX / NLX Aux Power Supply connector and layout of 6 pin ATX AUX power connector

Source(s): ATX Spec v2.03 at Platform Development Support, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
221 hits since February 12, 2005