Pinouts of Connectors

Betamax VCR Charger pinout

layout
schematic diagram

add this page to bookmarks

8 pin DIN "C" FEMALE connector pin-out & layout
8 pin DIN "C" FEMALE connector
Pin Signal Decription
1 R-SO  
2 NOT S-Clock  
3 NOT IR-2 remote control data for controlling the remote control microprocessor
4 NOT S-Data  
5 Ground (12v)  
6 Record Ready when low, the unit is in timer REC READY mode
7 Switched 12v internally fused in the video, rated at 500mA
8 IR / NOT EXT select signals for the remote control microcomputer

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of some home Audio/Video stuff. >  Pinout of Betamax VCR Charger and layout of 8 pin DIN "C" FEMALE connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
51 hits since February 11, 2005