Pinouts of Connectors

BTX motherboard power supply connector pinout

layout
schematic diagram

add this page to bookmarks

standard interface between BTX motherboard and compatible power supply

24 pin MOLEX 44206-0007 connector pin-out & layout
24 pin MOLEX 44206-0007 connector  at the motherboard
Pin Signal Description
1+3.3 VDC  
2+3.3 VDC  
3COM  
4+5 VDC  
5COM  
6+5 VDC  
7COM  
8PWR_OK Power good - indicate that VDC voltages are in range.
9+5 VSB Standby voltage
10+12 VDC  
11+12 VDC  
12+3.3 VDC  
13+3.3 VDC  
14-12 VDC  
15COM  
16PS_ON# Active low. TTL compatible (0.1-0.8V low; 2.0 high?). When low - DC outputs are enabled. When high - power supply should not deliver DC current.
17COM  
18COM  
29COM  
20N/C  
21+5 VDC  
22+5 VDC  
23+5 VDC  
24COM  

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
24 pin MOLEX 39-01-2240 connector pin-outs & layouts
24 pin MOLEX 39-01-2240 connector  at the power supply cable
Pinouts.ru > Pinouts of power supplyes >  Pinout of BTX motherboard power supply connector and layout of 24 pin MOLEX 44206-0007 connector and 24 pin MOLEX 39-01-2240 connector

Source(s): BTX interface specification at the www.formfactors.org
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
220 hits since February 11, 2005