Pinouts of Connectors

ATA 50 to 40 pin (notebook CD-ROM) pinout

layout
schematic diagram

add this page to bookmarks

This adapter will enable you to connect a 50 pin CD-ROM data cable to 40 pin ATA bus.

40 pin IDC FEMALE connector pin-out & layout
40 pin IDC FEMALE connector
ATA (40) PinCD-ROM (50) Pin Name Description
 1 Audio Left audio left
  2 Audio Right audio right
  3 Audio ground audio ground
2 4 GND Ground
1 5 /RESET Reset
4 6 DD8 Data 8
3 7 DD7 Data 7
6 8 DD9 Data 9
5 9 DD6 Data 6
8 10 DD10 Data 10
7 11 DD5 Data 5
10 12 DD11 Data 11
9 13 DD4 Data 4
12 14 DD12 Data 12
11 15 DD3 Data 3
14 16 DD13 Data 13
13 17 DD2 Data 2
16 18 DD14 Data 14
15 19 DD1 Data 1
18 20 DD15 Data 15
17 21 DD0 Data 0
21 22 DMARQ DMA Request
19 23 GND Ground
25 24 /DIOR Read Strobe
23 25 /DIOW Write Strobe
22 26 GND Ground
27 27 IORDY I/O Ready
29 28 /DMACK DMA Acknowledge
31 29 INTRQ Interrupt Request
32 30 /IOCS16 IO ChipSelect 16
33 31 DA1 Address 1
34 32 PDIAG Passed Diagnostics
35 33 DA0 Address 0
36 34 DA2 Address 2
37 35 /IDE_CS0 (1F0-1F7)
38 36 /IDE_CS1 (3F6-3F7)
39 37 /ACTIVE - /DASI - DASP Led driver
+5V 38 +5V + 5 volts power
+5V 39 +5V + 5 volts power
+5V 40 +5V + 5 volts power
+5V 41 +5V + 5 volts power
+5V 42 +5V + 5 volts power
24 43 GND Ground
26 44 GND Ground
30 45 GND Ground
40 46 GND Ground
28 47 Device Cfg Spindle Sync or Cable Select
GROUND 48 GND Ground
  49 reserved Vendor Unique
  50 reserved Vendor Unique

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
UNKNOWN connector  to the CD-ROM
Related Links:
Pinouts.ru > Pinouts of cables for disk drives >  Pinout of ATA 50 to 40 pin (notebook CD-ROM) and layout of 40 pin IDC FEMALE connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
164 hits since February 11, 2005