Universal data-cable / flash-cable for connecting mobile phone to the computer pinout |
layout |
This is most simple and common cable. Tested with Ericsson, Siemens, Panasonic, Sagem, Sony, Alcatel, Motorola cellular phones. Allows flashing.
9 pin D-SUB MALE connector to the computer | This scheme is some kind of RS-232 Driver/Receiver. Power is driven from COM-port. Almost all digital devices we use require TTL or CMOS logic levels. That"s why the first step when trying to connect the device to RS-232 port is transformation of RS-232 levels ack into 0 and 5 Volts. This is done by RS-232 Level Converters, like a Max 232. There are also many variations of these devices. Other devices are available
which use smaller capacitors and even some with built-in capacitors. (Note :
Some MAX-232"s can use 1 micro farad Capacitors). However the MAX-232 is the
most common, and thus this RS-232 Level Converter will be used in our example. This cable tested with: Alcatel OT, OneTouch db; Ericsson T10, T18s, T28s, A1018s, 888; Panasonic G450, G500, G520, G600, GD-70, GD-90; Sagem 612, 615, 715, 725, 730, 750, 820; Sony CMD-C5. Should work with most other phones except Nokia, Bosch. You can find a pinout for your model in the appropriate section of this website.
| UNKNOWN connector to the cellular phone | |
Pinouts.ru > Pinouts and schemes of cellular phones cables > Pinout of Universal data-cable / flash-cable for connecting mobile phone to the computer and layout of 9 pin D-SUB MALE connector | unknown | |
mark as correct |
0 report(s) | |
Click one of this links to change document status. |