Pinouts of Connectors

Cisco console port for Cisco 700 series routers pinout

layout
schematic diagram

add this page to bookmarks

9 pin D-SUB FEMALE connector pin-out & layout
9 pin D-SUB FEMALE connector
Pin Function
1 Output--Connects to the Carrier Detect (CD) input
2 Output--Connects to the Received Data (RXD) input
3 Input--Connects to the Transmitted Data (TXD) output
4 Input--Connects to the Data Terminal Ready (DTR) output
5 Signal Ground
6 Output--Connects to the Data Set Ready (DSR) input
7 Not used
8 Not used
9 Not used

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB MALE connector pin-outs & layouts
9 pin D-SUB MALE connector
Pinouts.ru > Pinouts of serial ports >  Pinout of Cisco console port for Cisco 700 series routers and layout of 9 pin D-SUB FEMALE connector and 9 pin D-SUB MALE connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
54 hits since February 12, 2005