Cisco Asynchronous-Line RJ45 to 68Pin SCSI cable pinout

layout
schematic diagram

68 pin HI-DENSITY D-SUB FEMALE connector

RJ-45 Plug	Pin	Signal	68-Pin SCSI (J1)
1	1	CTS	39
	2	DSR	5
	3	RXD	38
	4	RXD GND	4
	5	TXD GND	37
	6	TXD	3
	7	DTR	36
	8	RTS	2
2	1	CTS	43
	2	DSR	9
	3	RXD	42
	4	RXD GND	8
	5	TXD GND	41
	6	TXD	7
	7	DTR	40
	8	RTS	6
3	1	CTS	47
	2	DSR	13
	3	RXD	46
	4	RXD GND	12
	5	TXD GND	45
	6	TXD	11
	7	DTR	44
	8	RTS	10
4	1	CTS	51
	2	DSR	17
	3	RXD	50
	4	RXD GND	16
	5	TXD GND	49
	6	TXD	15
	7	DTR	48
	8	RTS	14
5	1	CTS	55
	2	DSR	21
	3	RXD	54
	4	RXD GND	20
	5	TXD GND	53
	6	TXD	19
	7	DTR	52
	8	RTS	18
6	1	CTS	59
	2	DSR	25
	3	RXD	58
	4	RXD GND	24
	5	TXD GND	57
	6	TXD	23
	7	DTR	56
	8	RTS	22
7	1	CTS	53
	2	DSR	29
	3	RXD	62
	4	RXD GND	28
	5	TXD GND	61
	6	TXD	27
	7	DTR	60
	8	RTS	26
8	1	CTS	67
	2	DSR	33
	3	RXD	66
	4	RXD GND	32
	5	TXD GND	65
	6	TXD	31
	7	DTR	64
	8	RTS	30

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.

8 pin RJ45 MALE connector

Pinouts.ru > Pinouts and schemes of serial ports cables > Pinout of Cisco Asynchronous-Line RJ45 to 68Pin SCSI cable and layout of 68 pin HI-DENSITY D-SUB FEMALE connector and 8 pin RJ45 MALE connector Source(s): Cisco Systems, Inc.	Document status:	unknown
	mark as erroneous! mark as correct	0 report(s)
	Click one of this links to change document status.

[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]

This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
54 hits since February 11, 2005

Cisco Asynchronous-Line RJ45 to 68Pin SCSI cable pinout

layoutschematic diagram

layout
schematic diagram