Pinouts of Connectors

Creative soundblaster AUD_EXT pinout

layout
schematic diagram

add this page to bookmarks

AUD_EXT connector pin assignments

40 pin IDC MALE connector pin-out & layout
40 pin IDC MALE connector  at the soundcard ?

1

VCC

+5V power supply

2

VCC

+5V power supply

3

GND

Ground

4

AC97CLK

24.5 MHz clock output

5

GND

Ground

6

GP_SPDIFIN#2

SPDIF input signal

7

GND

Ground

8

GND

Ground

9

SPDIFO#3

SPDIF Out signal

10

GPO1

General Purpose Output #1

11

GPO2

General Purpose Output #2

12

GND

Ground

13

GPO0

General Purpose Output #0

14

GND

Ground

15

GP_SPDIFIN1

SPDIF Input signal

16

GND

Ground

17

SPDIFO#0

SPDIF Out signal

18

GND

Ground

19

SPDIFO#1

SPDIF Out signal

20

GND

Ground

21

GND

Ground

22

SPDIFO#2

SPDIF Out signal

23

GPI0

Digital Input (GP Input 0; Reserved)

24

GPI1

Digital Input, (GP Input 1; Reserved)

25

OUTMIDI

MIDI Output

26

GND

Ground

27

INMIDI

MIDI Input

28

GND

Ground

29

KEY


30

KEY


31

ADCSDO2

I2S audio data input.

32

GND

Ground

33

ADCSDO1

I2S audio data input.

34

GND

Ground

35

ADCSDO0

I2S audio data input.

36

GND

Ground

37

I2SCLK

I2S serial bit clock.

38

GND

Ground

39

I2SFS

Frame sync.

40

GND

Ground

ADC stands for Analog-to-Digital Converter

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of computer multimedia >  Pinout of Creative soundblaster AUD_EXT and layout of 40 pin IDC MALE connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
146 hits since February 12, 2005