Pinouts of Connectors

Dataproducts M/50 Parallel connector pinout

layout
schematic diagram

add this page to bookmarks

50 pin M/50 MALE connector pin-out & layout
50 pin M/50 MALE connector
Pin Return Dir Description Active State
CC EE <-- Ready High
Y AA <-- On Line High
E C <-- Demand High
j m --> Data Strobe High
B D --> Data 1 n/a
F J --> Data 2 n/a
L N --> Data 3 n/a
R T --> Data 4 n/a
V X --> Data 5 n/a
Z b --> Data 6 n/a
n k --> Data 7 n/a
u w --> Data 8 n/a
z BB --> Parity n/a
d f <-- Ident 0 n/a
a c <-- Ident 1 n/a
v x --> Interface Verify Low
HH K --> +5 VDC (Test) High
r t <-- Parity Error High
M P <-- Bottom of Form High
S U <-- Top of Form High
p s --> Paper Instruction High
A H --> Buffer Clear High
W Y <-- Paper Moving High
FF DD <-- Paper Moving High
e h <-- Not VFU High

Note: Direction is Host (Computer) relative Peripheral (Printer).
Note: Return is Ground signal for Unbalanced and the Negative Signal for Balanced.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
50 pin M/50 FEMALE connector pin-outs & layouts
50 pin M/50 FEMALE connector
Pinouts.ru > Pinouts and schemes of parallel ports connectors >  Pinout of Dataproducts M/50 Parallel connector and layout of 50 pin M/50 MALE connector and 50 pin M/50 FEMALE connector

Source(s): Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
45 hits since February 11, 2005