Pinouts of Connectors

Sega Dreamcast A/V connector pinout

layout
schematic diagram
add this page to bookmarks

Pin Description
1 Ground
2 Right Audio
3 Left Audio
4 +12v
5 +5v
6 31 kHz RGB - (VGA rate) Connect to GND with pin 7
7 15 kHz RGB - (TV rate) Connect to GND
8 Vertical Sync (for VGA)
9 Horizontal Sync (for VGA)
10 Composite Sync
11 S-video
12 S-video
13 Composite Video
14 Blue (Use 220uf cap)
15 Green (Use 220uf cap)
16 Red (use 220uf cap)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of videogames connectors >  Pinout of Sega Dreamcast A/V connector and layout of connector

Source(s): Hardware Book, Marcus Hilbe, Marvin
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
64 hits since February 11, 2005