Pinouts of Connectors

EIA-449 (RS-449) Secondary connector pinout

layout
schematic diagram
add this page to bookmarks

Common names: EIA-449, RS-449, ISO 4902. Secondary (auxilary) channel

9 pin D-SUB MALE connector pin-out & layout
9 pin D-SUB MALE connector  at the computer
Pin Name RS232 V.24 Dir Description
1   n/a 101 --- Shield
2 SSR SRR 122 <-- Secondary Receiver Ready
3 SSD SSD 118 --> Secondary Send Data
4 SRD SRD 119 <-- Secondary Receive Data
5 SG SG 102 --- Signal Ground
6 RC RC 102b --- Receive Common
7 SRS SRS 120 --> Secondary Request To Send
8 SCS SCS 121 <-- Secondary Clear To Send
9 SC SC 102a --- Send Common

Note: Direction is DTE (Computer) relative DCE (Modem).
Note: RS232 column is RS232 circuit name.
Note: V.24 column is ITU-TSS V.24 circuit name.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of serial ports >  Pinout of EIA-449 (RS-449) Secondary connector and layout of 9 pin D-SUB MALE connector

Source(s): RS449 Page at Connectivity Knowledge Platform (Made IT), from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
65 hits since February 12, 2005