Pinouts of Connectors

HP 4S Scanner connector pinout

layout
schematic diagram

add this page to bookmarks

9 pin D-SUB FEMALE connector pin-out & layout
9 pin D-SUB FEMALE connector
Pin Name Dir Description
1 CD <-- Carrier Detect
2 RXD <-- Receive Data
3 TXD --> Transmit Data
4 GND --- System Ground
5 CTS <-- Clear to Send
6 DSR <-- Data Set Ready
7 RI <-- Ring Indicator
8 RTS --> Request to Send
9 DTR --> Data Terminal Ready

Note: Direction is DTE (Computer) relative DCE (Scanner).

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB MALE connector pin-outs & layouts
9 pin D-SUB MALE connector
Pinouts.ru > Pinouts of different devices connectors >  Pinout of HP 4S Scanner connector and layout of 9 pin D-SUB FEMALE connector and 9 pin D-SUB MALE connector

Source(s): HP 4S Scanner pinout at The Pin-Out directory, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
44 hits since February 12, 2005