Pinouts of Connectors

HP Video Power Connector pinout

layout
schematic diagram
add this page to bookmarks

this connector is not used often

4 pin HP video power connector pin-out & layout
4 pin HP video power connector
Power Supply
Pin		 Name Direction Description
1 -12 Volts -12 Volts
2 Ground -12 Volts Ground
3 Ground +12 Volts Ground
4 +12 Volts +12 Volts

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of power supplyes >  Pinout of HP Video Power Connector and layout of 4 pin HP video power connector

Source(s): http://www.power-on.com/miathppa1.html Wilfred Dumont
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
88 hits since February 12, 2005