Pinouts of Connectors

HP iPAQ 31/36/3700 connector pinout

layout
schematic diagram
add this page to bookmarks

12 pin iPAQ MALE special connector pin-out & layout
12 pin iPAQ MALE special connector  at the PDA or cable
Pin Signal Description
1V_ADP AC adapter power in +
2V_ADP AC adapter power in +
3DTR RS232 Data Terminal Ready
4 GND Ground
5CTS RS232 Clear To Send
6RTS RS232 Request To Send
7TXD RS232 Transmit Data, GPS R
8RXD RS232 Receive Data, GPS T
9DCD RS232 Data Carry Detect
10GND Ground
11USB - UDC + USB positive data signal
12USB - UDC - USB negative data signal

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > PDA, HandHeld computers connectors >  Pinout of HP iPAQ 31/36/3700 connector and layout of 12 pin iPAQ MALE special connector

Source(s): kolumbus.fi
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
145 hits since February 12, 2005