Pinouts of Connectors

HP iPaq 22 pin connector pinout

layout
schematic diagram
add this page to bookmarks

used in 38 model and newer?

22 pin MALE Himalaya special connector pin-out & layout
22 pin MALE Himalaya special connector  at the PDA (keypad up)
Pin Signal Description
1,2,3,4V_ADP   
5Reserved Do Not Use 
6DCD RS-232 Data Carry Detect 
7RXD RS-232 Receive Data 
8TXD RS-232 Transmit Data 
9DTR RS-232 Data Terminal Ready 
10,15,22GND Ground 
11DSR RS-232 Data Set Ready 
12RTS RS-232 Request To Send  
13CTS RS-232 Clear To Send  
14RING RS-232 Ring 
16,18,20N.C. Do Not Use 
17USB Detect Detect 
19UDC+ USB positive data signal 
21UDC- USB negative data signal 

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > PDA, HandHeld computers connectors >  Pinout of HP iPaq 22 pin connector and layout of 22 pin MALE Himalaya special connector

Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
166 hits since February 11, 2005